91果冻制片厂

2001鈥�2010

• 2010 Publications

  • by BCME Faculty and Students

    (* indicates student author)

    1. Nakamura, J.*, Komives, C., O'Sullivan, D., Zeid, J.*, Mak, P., "Characterization of Virucidal Heat Treatment of a Recombinant Protein," 239th American Chemical Society National Meeting, San Francisco, CA, (March 21-25, 2010).
    2. Komives, C., "Ethics Education for Chemical Engineering Undergrads," 2010 AIChE Annual Conference, Salt Lake City, UT, (November 7-12, 2010).
    3. Grace Yan Yi Lau*, Michael C Tucker, Craig P Jacobson, Steven J Visco, Stacy H Gleixner, and Lutgard C DeJonghe, 鈥淐hromium Transport by Solid State Diffusion on Solid Oxide Fuel Cell Cathode,鈥� Journal of Power Sources 195, 7540-7547, (2010).

    4. Nuno, Hector; Lee, Victor Y.; Shah, Shimul K.; Krupp, Leslie; McNeil, Melanie; Miller, Robert D.; Sly, Jos茅ph. Star polymer templated, dye occluded, functionalized silica nanoparticles for optoelectronic applications鈥�, Abstracts of Papers, 239th ACS National Meeting, San Francisco, CA, United States, March 21-25, 2010 (2010)

    5. Tjio, M.; Lee, V.; Kellock, A.; Frommer, J.; Risk, W.; Jefferson, C.; McNeil, M.; Miller, R.; Sly, J.; 鈥淪tar polymer templated electroless deposition of plasmonic metal nanostructures鈥� PMSE Preprints (2010).

    6. Nuno, H.; Lee, V.; Shah, S.; Krupp, L.; McNeil, M.; Miller, R.; Sly, J.; 鈥淪tar polymer templated, dye occluded, functionalized silica nanoparticles for optoelectronic applications.鈥� Polymer Preprints (2010).

• 2009 Publications

  • by BCME Faculty and Students

    (* indicates student author)

    1. Komives, C., Fernandez, E. J., "Bioengineering Educational Materials Bank," Biochemical Engineering XVI, Burlington, VT, (July 5-9, 2009).
    2. Komives, C., Fernandez, E. J., "Students Create Problems for Teaching and Learning," Proceedings of the ASEE 2009 Annual Conference and Exposition, Austin, TX, (June 14-17, 2009).
• 2008 Publications

  • by BCME Faculty and Students

    (* indicates student author)

    1. Duhamel, P., McNeil, M., et. al. , "Nanostructuring Porous Evanescent Wave Biosensors," Proceedings of the 235th ACS National Meeting, New Orleans, LA, (April 6-10, 2008).
    2. Komives, C., "Use of a Generalized Rubric for Teaching Students to Design Experiments," 2008 AIChE Annual Meeting, Philadelphia, PA, (November 16-21, 2008).
    3. Yim, S., Ohta, R., Killian, J. L., Zuckerman, N. B., Allen, E., Nguyen, C. V., "Enhanced Field Emission Properties from Carbon Nanotube Emitters Grown on NiCr Alloy Surfaces with Grain Boundary Effect," IEEE International Vacuum Electronic Conference, Monterey, CA, (April 22-24, 2008).
    4. Aihara, H., Selvaduray, G., Craig, A. Y., Moskito, J., "Surface Characteristics and Biocompatibility Study of Electropolished Wrought Co-Cr Alloy L605 for Biomedical Application," Proceedings of the 2008 International Medical Devices Conference, Minneapolis, MN, (October 1-3, 2008).
    5. Aihara, H., Selvaduray, G., "Surface Characterization and Biocompatibility of Co-Cr Alloy L605 Electropolished in 15 vol % Phosphoric Acid," Proceedings of the 2008 Translational Biomaterial Research Symposium, Atlanta, Georgia, (September 11-13, 2008).
    6. Leung, D., Selvaduray, G., "Effect of Design Factors on Microvia Reliability of Flip Chip Ball Grid Array Polymeric Substrates," Journal of Microelectronics and Electronic Packaging, 5, 104-115 (2008).
    7. S.H. Gleixner, E. Douglas, O. Graeve, 鈥淓ngineering Project Laboratory Modules for an Introduction to Materials Course鈥�, Procs. 2008 American Society for Engineering Education 989, (2008).
    8. Aihara, H., G. S. Selvaduray, A. Y. Craig, and J. Moskito, 鈥淪urface Characteristics and Biocompatibility Study of Electropolished Wrought Co-Cr Alloy L605 for Biomedical Application鈥�, Proceedings of 2008 International Medical Devices Conference, Oct 1-3, 2008, Minneapolis, Minnesota
    9. Leung, D. and G. Selvaduray, 鈥淓ffect of Design Factors on Microvia Reliability of Flip Chip Ball Grid Array Polymeric Substrates,鈥� Journal of Microelectronics and Electronic Packaging, No. 5, p 104-115.
    10. Aihara, H. and G. S. Selvaduray, 鈥淪urface Characterization and Biocompatibility of Co-Cr Alloy L605 Electropolished in 15 vol % Phosphoric Acid鈥�, Proceedings of 2008 Translational Biomaterial Research Symposium, Society for Biomaterials, September 11-13, 2008, Atlanta, Georgia
    11. Duhamel, P., Bonifacio, C., Chang, L., McNeil, M., Magbitang, T., Frommer, J., Lee,V.., Park, O., Pl., Jefferson, M., Risk, W., Kim,, H., Sly, J., and Miller, R., 鈥淣anostructuring Porous Evanescent Wave Biosensors,鈥� Proceedings of the 235th ACS National Meeting, New Orleans, LA (2008).
    12. M.-Y. Lee*, Kumar, R. A.*, M. Hogg, S. Sukumaran, J.S. Dordick, D.S. Clark (2008), 鈥淭hree-dimensional cellular microarray for high-throughput toxicology assays鈥�, Proc. Natl. Acad. Sci. (USA), 105, 59-63 (* equal contribution). PMID: 18160535
• 2007 Publications

  • by BCME Faculty and Students

    (* indicates student author)

    1. M. Drexel*, G. Selvaduray, and A. Pelton, "The Effects of Cold Work and Heat Treatment on the Properties of Nitinol Wire," 2nd Frontiers in Biomedical Devices Conference, Irvine, California (June 7-8, 2007)
    2. Drexel, M.*, G.S. Selvaduray, and A. Pelton, "The Effects of Cold Work and Heat Treatment on the Properties of Nitinol Wire," Proceedings of Materials and Processes for Medical Devices Conference, Palm Desert, California (September 23-25, 2007)
    3. Singh, A., Young, G., et. al. , "Particle Size Control, Structure and Magnetic Characterization of Cobalt Nanoparticles," Proceedings of the 2007 MRS Spring Meeting, Volume 998E, (2007).
    4. Sly, J., McNeil, M., et. al. , "Versatile Layer-by-Layer Surface Modification Using Functionalized Star-polymers and Epitaxial Polyvalent Self-assembly," Proceedings of the 233rd ACS National Meeting, Chicago, IL, (March 25-29, 2007).
    5. Sly, J., McNeil, M., et. al. , "Functionalized Star?polymers and Epitaxial Polyvalent Self?assembly," Proceedings of the 233rd ACS National Meeting, Chicago, IL, (March 25-29, 2007).
    6. Komives, C., Beitle, R., Fernandez, E. J., "BioX for All: No Chemical Engineering Student Left Behind," Biochemical Engineering XV, Quebec City, Canada, (July 15-19, 2007).
    7. Komives, C., Fernandez, E. J., "Bringing Life into the Chemical Engineering Curriculum: BioX Meets Material and Energy Balances," 2007 AIChE Annual Meeting, Salt Lake City, UT, (November 4-9, 2007).
    8. Anagnos, T., Komives, C., Mourtos, N., McMullin, K., "Evaluating Student Mastery of Design of Experiment," Proceedings of the 37th ASEE/IEEE Frontiers in Education Conference, Milwaukee, WI, (October 10-13, 2007).
    9. Michaels, A. D., Allen, E., Linsdell, J., "Writing Program Improvements for a Materials Engineering Laboratory Course," Proceedings of the 2007 ASEE Annual Conference & Exposition, Honolulu, HI, (June 24-27, 2007).
    10. Cho, S., Allen, E., Nguyen, D., Chu, Q., "Process Development For Heat Sink Attachment Using Thermally Conductive Liquid Adhesives," Proceedings of the IEEE Semi-Therm 23 Symposium, San Jose, CA, (March 20-22, 2007).
    11. Cruz, M. M.*, Winslow, R. T., Selvaduray, G. S., "Effect of BGA Reballing on the Formation of Intermetallic Compounds," Proceedings of the Symposium for RoHS Impact on Rework/Repair/Reprocessing, College Park, MD, (September 11, 2007).
    12. Cruz, M. M.*, Winslow, R. T., Selvaduray, G. S., "Minimizing Thermal Gradients during Hot Solder Dip," Proceedings of the Components for Military & Space Electronics Conference, Los Angeles, CA, (March 12-15, 2007). 335-352.
    13. Cruz, M. M.*, Selvaduray, G. S., "Interfacial Reactions between Sn-3.0Ag-0.5Cu Solder and Printed Circuit Board Coatings," Proceedings of the IPC International Conference on Lead-free Materials Surface Finishes, San Jose, CA, (May 8-9, 2007).
    14. Chun, B., Aihara, H., Kuo, A. M-C.*, Jaladi, K., Selvaduray, G., Craig, A. Y., "Effect of Microblasting on Surface Characteristics and Cytotoxicity of NiTi," Proceedings of the Materials and Processes for Medical Devices Conference, Palm Desert, (September 23-25, 2007).
    15. Sly, J.; Bonifacio, C. S.*; Chang, L.; Glab, K. L.; Lee, V. Y.; McNeil, M.; Jefferson, C. M.; Frommer, J. E.; Risk, W. P.; Miller, R. D.; 鈥淩eaching for the Stars:Layered Polyvalent Self-Assembly of Hyperbranched Pigment Arrays鈥�. PMSE Preprints, 97, 200-201, 2007.
    16. S. J. Lee, S. Gleixner, T. R. Hsu, D. Parent, "Implementation of a MEMS Laboratory Course with Modular, Multidisciplinary Team Projects", Proceedings of the ASEE Annual Meeting 2007, Honolulu, HI, Paper 2007-1572 (2007).
    17. S.H. Gleixner, E. Douglas, O. Graeve, 鈥淧RIME Modules: Teaching Introduction to Materials Engineering in the Context of Modern Technologies鈥�, Procs. 2007 American Society for Engineering Education 1576, (2007).
    18. Drexel, M., G.S. Selvaduray, and A. Pelton, 鈥淭he Effects of Cold Work and Heat Treatment on the Properties of Nitinol Wire", Proceedings of Materials and Processes for Medical Devices Conference, Palm Desert, California (September 23-25, 2007).
    19. Chun B., H, Aihara, A.M.-C. Kuo, K.Jaladi, G. S. Selvaduray, and A.Y. Craig, 鈥淓ffect of Microblasting on Surface Characteristics and Cytotoxicity of NiTi鈥�, Proceedings of Materials and Processes for Medical Devices Conference, Palm Desert, California (September 23-25, 2007).
    20. Cruz, M. M., R. T. Winslow, and G.Selvaduray, 鈥淓ffect of BGA Reballing on the Formation of Intermetallic Compounds,鈥� Symposium for RoHS Impact on Rework/Repair/ Reprocessing, Maryland, USA (September 11, 2007).
• 2006 Publications

  • by BCME Faculty and Students

    (* indicates student author)

    1. Scheffler, R., Ye, L. Q., McNeil, M., "Electrodeposition of Bismuth Telluride Nanowires for Thermoelectric Applications: Synthesis, Characterization, and Properties," 2006 AIChE Annual Meeting, San Francisco, CA, (November 12-17, 2006).
    2. Drexel, M. J.*, Selvaduray, G., Pelton A. , "The Effects of Cold Work and Heat Treatment on the Properties of Nitinol Wire," Proceedings of the 4th International Conference on Shape Memory and Superelastic Technologies, Pacific Grove, CA, (May 7-11, 2006).
    3. Selvaduray, G. S., Trigwell, S., "Effect of Surface Treatment on Surface Characteristics and Biocompatibility of AISI 316L Stainless Steel," Proceedings of the NanoBio2006 Frontiers in Biomedical Devices Conference, Irvine, CA, (June 8-9, 2006).
    4. Vukazich, S., Selvaduray, G., Tran, J., "Santa Clara County Soft First Story Multi Unit Building Survey," Earthquake Spectra, (November 2006).
    5. Winslow, R. T., Iyer, G. R., Cruz, M. M.*, Selvaduray, G. S., "Hot Solder Dip and Minimizing Thermal Gradients," Proceedings of the International Microelectronics and Packaging Society International Symposium, San Diego, CA, (October 8-12, 2006). 513-520.
    6. Lee S.J., Allen, E., He L. , "A Bottom-Up Approach to Interdisciplinary Engineering Education in Nanotechnology," Materials Research Society Symposium Proceedings, San Francisco, CA, (April 2006), Vol. 931.
    7. S. J. Lee, S. Gleixner, T. R. Hsu, D. Parent, "A Development Framework for Hands-On Laboratory Modules in Microelectromechanical Systems (MEMS)", Proceedings of the ASEE Annual Meeting 2006, Chicago, IL, Paper 2006-2445 (2006).
    8. R. Lawrence Comstock, "Magnetic Information-Storage Materials", Chapter 51 in Springer Handbook of Electronic and Photonic Materials, edited by S. Kasap and P. Capper, 漏 Springer 2006
    9. Andrew Tzanavaras*, Gregory Young, and Stacy Gleixner, "The Microstructure and Grain Size of Jet Electroplated Copper Films in Damascene Trench Features", Journal of the Electrochemical Society, 153(7), C509, (2006).
    10. Meow Yen Sim* and Stacy Gleixner, "Studying the Etch Rates and Selectivity of SiO2 and Al in BHF Solutions", Proceedings of the University/Government/Industry Microelectronics Symposium, San Jose, CA (2006).
    11. S.H. Gleixner, E. Douglas, O. Graeve, H. Lackritz, L. Demsetz, A. Moll, "Project-Based Introductory to Materials Engineering Modules on Biomaterials, Solid Oxide Fuel Cells, Non-Volatile Memory, and Fiber Reinforced Plastics", Procs. 2006 American Society for Engineering Education 2464, (2006).
    12. Harjot S. Bhullar*, Gee Lyn Echaluse*, Nimoal Sun**, Khe Dinh**, Ula Odeh**, Michael Jennings, Claire Komives; "Fuel-Grade Ethanol Using New Technologies," 2006 AIChE Annual Meeting, San Francisco, CA, Paper #611g in Separation of Processing Streams Derived from renewable feedstocks.
    13. Claire Komives, Biochemical Engineering Laboratory Course for Chemical Engineering Students, Proceedings of the 9th International Conference on Engineering Education, July 23-28, 2006, SJ Puerto Rico, pp. M3F 22-27.
    14. Claire Komives, Katy Korsemeyer, Bioprocess Technology Course for High School and Community College Teachers, Proceedings of the 9th International Conference on Engineering Education, July 23-28, 2006, SJ Puerto Rico, pp. R3D 8-13.
    15. Claire Komives, Nikos Mourtos, Thalia Anagnos and Kurt M. McMullin, Enhancing Inquiry Skills in Engineering through a University-School District Partnership, Proceedings of the 9th International Conference on Engineering Education, July 23-28, 2006, SJ Puerto Rico, pp R4B 1-6.
    16. Walt Prater, "Comparison of ceramic material effects on the flexural Weibull statistics and fracture of high volume fraction particle reinforced aluminum," Materials Science and Engineering A 420, 187-198 (2006).
    17. Vukazich, S., G. Selvaduray and J. Tran, "Santa Clara County Soft FirstStory Multi Unit Building Survey", Earthquake Spectra, November 2006.
    18. Sree Harsha, K.S., Principles of Physical Vapor Deposition of Thin Films, Elesevier, Amsterdam (2006).
    19. Sree Harsha, K. S., Principles of Physical Vapor Deposition of Thin Films, Elsevier Press, The Netherlands, 2006.
    20. Art Diaz and R.M. Felix-Navarro, "Contact Charging of Coatings of Ionomer/Polymer Blends," Journal of Electrostatics, Journal of Electrostatics, 64, (2006) 62-68.
    21.  Vukazich, S., G. Selvaduray, and J. Tran, 鈥淪anta Clara County Soft First Story Multi Unit Building Survey鈥�, Earthquake Spectra, Earthquake Engineering Research Institute, (November 2006).
    22. Selvaduray, G. and S. Trigwell, 鈥淓ffect of Surface Treatment on Surface Characteristics and Biocompatibility of AISI 316L Stainless Steel,鈥� Proceedings of NanoBio2006 Frontiers in Biomedical Devices Conference, Irvine, California. (June 8-9, 2006).
    23. Drexel, Masao J., G. Selvaduray and A. Pelton, 鈥淭he Effects of Cold Work and Heat Treatment on the Properties of Nitinol Wire鈥�, Proc. 4th International Conference on Shape Memory and Superelastic Technologies, Asilomar, California. (April 2006).
    24. Scheffler, L. Q. Ye and M. McNeil, Electrodeposition of Bismuth Telluride Nanowires for Thermoelectric Applications: Synthesis, Characterization, and Properties, Proceedings of Annual Meeting of American Institute of Chemical Engineers, November (2006).
• 2005 Publications

  • by BCME Faculty and Students

    (* indicates student author)

    1. Art Diaz and Martha E. Armenta-Armenta, "Oxidation of Benzoic Acid by Electrochemically Generated Ce(IV)," J. Environmental Science and Technology, 39, (15), 5877 (2005).
    2. Chris W. Lehman, Jaquelina D.R. Lee*, and Claire Komives (ChE), Ubiquitously expressed GPCR membrane-trafficking orthologs, Genomics, 85(3), 386 (2005).
    3. Selvaduray, G. and S. Trigwell, "Effect of Surface Treatment on Surface Characteristics of 316L Stainless Steel" Proceedings Materials and Processes for Medical Devices Conference, ASM International, Boston, Massachusetts. (November 14-16, 2005)
    4. Selvaduray, G., "Partnership Building for Disaster Mitigation: Collaboration among Government, Business and Academia", Proceedings International Workshop on Emergency Response and Rescue, National Council on Science and Technology for Disaster Reduction, Taipei, Taiwan. (October 31-November 1, 2005)
    5. Trigwell, S. and G. Selvaduray, "Effects of welding on the passive oxide film of electropolished 316L stainless steel," Journal of Materials Processing Technology No. 166 p 30-43 (2005).
    6. Chang, W.*, D.-S Jiang and G. Selvaduray, "CSP Drop Test Performance Comparison for Different Solder Ball Materials", Proceedings IPC/JEDEC 8th International Conference on Lead Free Electronic Components and Assemblies, San Jose, California. (April 2005)
    7. Steve Shannon (Lecturer, MatE), D. Hoffman, J.G. Yang, A. Paterson, and J. Holland; "Study of a radio frequency sheath driven by two frequencies - IEDF dependence and Vdc dependence", J. Appl. Phys. 97(10) (2005).
    8. Tzanavaras, A.*, Young, G (ChE)., Gleixner, S. (MatE), "The Grain Size and Microstructure of Jet-Electroplated Copper Films," Journal of the Electrochemical Society, Volume 152, 2005, pp. C101-107
    9. Richard Chung (MatE),"Gas Permeability of Cloisite/PHMS Nanocomposite Membranes," XIV International Materials Research Congress 2005, Cancun, Mexico, Symposium 1, 46-47 (2005).
    10. T. Magbitang, V. Y. Lee, J. N. Cha, H.-L. Wang*, W. R. Chung, R. D. Miller. G. Dubois, W. Volksen, H.-C. Kim, and J. L. Hedrick," Oriented Nanoporous Lamellar Organosilicates Templated from Topologically Unsymmetrical Dendritic-Linear Block Copolymers," Angew. Chem. Int. Ed., 44, 1-7 (2005).
    11. W. L. Prater*, E. L. Allen ,W. -Y. Lee, M. F. Toney, A. Kellock, J. S. Daniels, J. A. Hedstrom and T. Harrell, "Microstructural comparisons of ultra-thin Cu films deposited by ion-beam and dc-magnetron sputtering," J. Appl. Phys., 97, 1 (2005).
    12. Claire Komives (ChE), Louis Yip-Yan Cheung*, Stefanie Plushkell and Michael Flickinger, "Growth of B. Methanolicus Strain PB1 in Salt Water-Based Medium," Journal of Industrial Microbiology and Biotechnology, 32(2), 61 (2005).
    13. Chris W. Lehman, Jaquelina D.R. Lee*, and Claire Komives (ChE), Ubiquitously expressed GPCR membrane-trafficking orthologs, Genomics, 85(3), 386 (2005).
    14. H. Liao, W. Yeh, D. Chiang, R. L. Jernigan and Brooke Lustig (Lecturer, ChE), "Protein sequence entropy is closely related to packing density and hydrophobicity" Prot. Engr. 18, 59 (2005).
    15. Claire Komives (ChE), Louis Yip-Yan Cheung*, Stefanie Plushkell and Michael Flickinger, Growth of B. Methanolicus Strain PB1 in Salt Water-Based Medium, Journal of Industrial Microbiology and Biotechnology, 32(2), 61 (2005).
    16. David Parent, Eric Basham, Yasser Dessouky, Stacy Gleixner, Gregory Young, and Emily Allen, "Improvements to a Microelectronic Design and Fabrication Course", IEEE Transactions on Education, 48(3), 497 (2005).
    17. J.E. Clendenin, A. Brachmann, E.L. Garwin, Stefanie Harvey (Lecturer, MatE), J. Jiang, R.E. Kirby, D.-A. Luh, T. Maruyama, R. Prepost, C.Y. Prescott and J.L. Turner , "Recent Progress at SLAC Extracting High Charge from Highly Polarized Photocathodes for Future-Collider Applications", Nuclear Instruments and Methods A, 536 (3) 308-311 (2005).
    18. Teddie Magbitang, Victor Y. Lee, Jennifer N. Cha, Hsiao-Lin Wang*, W. Richard Chung, Robert D. Miller, Geraud Dubois, Willi Volksen, Ho-Cheol Kim, and James L. Hendrick, "Oriented Nanoporous Lamellar Organosilicates Templated from Topologically Unsymmetrical Dendritic-Linear Block Copolymers", Angew. Chem. Int. Ed., 2005, 44, pp. 1-7.
    19. Andrew Tzanavaras*, Gregory Young, and Stacy Gleixner, "The Grain Size and Microstructure of Jet-Electroplated Damascene Copper Films", Journal of the Electrochemical Society, 152(2), C101 (2005).
    20. J.E. Clendenin, A. Brachmann, E.L. Garwin, Stefanie Harvey (Lecturer, MatE), J. Jiang, R.E. Kirby, D.-A. Luh, T. Maruyama, R. Prepost, C.Y. Prescott and J.L. Turner , "Recent Progress at SLAC Extracting High Charge from Highly Polarized Photocathodes for Future-Collider Applications", Nuclear Instruments and Methods A, 536 (3) 308-311 (2005).
    21. T. Magbitang, V. Y. Lee, J. N. Cha, H.-L. Wang, W. R. Chung, R. D. Miller. G. Dubois, W. Volksen, H.-C. Kim, and J. L. Hedrick,鈥� Oriented Nanoporous Lamellar Organosilicates Templated from Topologically Unsymmetrical Dendritic-Linear Block Copolymers,鈥� Angew. Chem. Int. Ed., 44, 1-7, 2005.
    22. Mao, H.T. Ng, P. Nguyen, M. McNeil, and M. Meyyappan, "Silicon Nanowire Synthesis by a Vapor-Liquid-Solid Approach," J. Nanosci. Nanotech. 2005, 5, pp. 831-835.
    23. McNeil, M., Stoynova, L., Rech, S., Building Molecular Biology Laboratory Skills in Chemical Engineering Students鈥�, Chemical Engineering Education, Summer 2005.
• 2004 Publications

  • by BCME Faculty and Students

    (* indicates student author)

    1. Claire Komives (ChE) and Ruizhen Chen; Biocatalysis, Encyclopedia of Biomaterials and Biomedical Engineering, Gary Wnek and Gary Bowlin, eds., Marcel Dekker, Inc., 2004, pp. 72-78.
    2. Yasser Dessouky, David Steele, Emily Allen (MatE), Stacy Gleixner (MatE), Greg Young (ChE), and David Parent, "Educational Modules based on Semiconductor Manufacturing for Teaching Statistical Concepts"," Proceedings of the 34th International Conference on Computers & Industrial Engineering (2004)
    3. Kevin Mai*, Richard Chung (MatE), April Tai* and A. F. Diaz (Lecturer, ChE), "Nano-clays/Polymer Nanocomposite Thin Films," V International Symposium: Chemical Research in the Border Region, Institute Technology of Tijuana, Tijuana, B.C., Mexico, 111 (2004).
    4. Surgit Gill*, Richard Chung (MatE) and A.F. Diaz (Lecturer, ChE), "Nanocor I.30E Clay/Epon 862 Nanocomposite Films," V International Symposium: Chemical Research in the Border Region, Institute Technology of Tijuana, Tijuana, B.C., Mexico, 109 (2004).
    5. Stefanie Harvey (Lecturer, MatE), F. Le Pimpec, R.E. Kirby, F. Marcelja, K. Adamson, E.L. Garwin, "Surface Analysis of Oxygen Free Electrolytic Copper X-band Accelerating Structures and Possible Correlation to Radio Frequency Breakdown Events", JVST A 22 (4) 1326-1330 (2004).
    6. G.L. Young (ChE) and J. Sohal*, "Micro-roughening of Epoxy and Cyanate Ester Laminates as a Precursor to Electroless Plating," accepted for publication in Plating Surface and Finishing (2004).
    7. A. Tzanaveras*, G.L. Young (ChE) and S. Gleixner (MatE), "The Grain Size and Microstructure of Jet Electroplated Damascene Copper Films," accepted for publication in the Journal of Electrochemistry (2004).
    8. Claire Komives (ChE), Sabine Rech, and Melanie McNeil (ChE), Laboratory Experiment on Gene Subcloning for Chemical Engineering Students, Chemical Engineering Education. Summer 2004, pp. 212 - 221.
    9. W. L. Prater*, E. L. Allen (MatE) ,W. -Y. Lee, M. F. Toney, A. Kellock, J. S. Daniels, J. A. Hedstrom and T. Harrell, "Microstructural comparisons of ultra-thin Cu films deposited by ion-beam and dc-magnetron sputtering," accepted for publication in Journal of Applied Physics (2004).
    10. Trigwell, S.* and G. Selvaduray (MatE), "Effects of welding on the passive oxide film of electropolished 316L stainless steel," Journal of Materials Processing Technology (Accepted for publication) June 2004.
    11. Walter L. Prater*, Emily L. Allen (MatE), Wen-Y. Lee, Michael F. Toney, Jonathan Daniels and Jonathan A. Hedstrom, "Reduction of resistivity in Cu thin films by partial oxidation: microstructural mechanisms," Appl. Phys. Lett. 84, 13 (2004).
    12. Stacy Gleixner (MatE) and Hilary Lackritz (MatE), "Use of Collaborative Learning Exercises to Increase Student Motivation and Learning in an Introduction to Materials Engineering Course," ASEE Annual Conference Proceedings, online session #3664 (June 2004).
    13. Steve Shannon (MatE), D. Hoffman, J-G Yang, A. Paterson, T. Panagopoulos, J. Holland, D. Buchberger, B. Mays, A. Fox, M. Chafin, and T. Detrick , "Improved Plasma Characterization and Chucking Force Control Using RF Measurement and Empirical Plasma Modeling"; Proceedings of the Fifth International Conference on Microelectronics and Interfaces; Santa Clara CA; March 2004.
    14. Art Diaz and R.M. Felix-Navarro, "A Semi-Quantitative Tribo-electric Series for Polymeric Materials: The Influence of Chemical Structure and Properties," Journal of Electrostatics, 62 (2004) 277.
    15. Komives, C., Rech, S., McNeil, M., Laboratory Experiment on Gene Subcloning for Chemical Engineering Students, Chemical Engineering Education, Summer 2004, pp. 212 - 221.
• 2003 Publications

  • by BCME Faculty and Students

    (* indicates student author)

    1. Claire Komives (ChE) and Robert Parker; Bioreactor State Estimation and Control, Current Opinion in Biotechnology, Elsevier Science London, 14(5), 2003, pp. 468 - 474.
    2. Gary Binyamin, Hilary S. Lackritz (MatE), "Plastic Microfluidic Devices: Electrokinetic Manipulations, Life Science Applications, and Production Technologies", Lab-on-a-chip: Miniaturized Systems for (Bio)Chemical Analysis and Synthesis, Osterbrook, R. E.; van der Berg, A. (editors); Elsevier Science, Amsterdam (September 2003), 83.
    3. K. Staub, G. A. Levina, S. Barlow, T. C. Kowalczyk, Hilary S. Lackritz (MatE), M. Barzoukas, S. R. Marder, "Synthesis and Stability of Conformationally Locked 4-(diarylamino)aryl- and 4-(dialkylamino)phenyl substituted second-order Nonlinear Optical Polyene Chromophores", Journal of Materials Chemistry, 13(4), (2003), 825.
    4. Steve Shannon (MatE), Daniel Hoffman, Jang-Gyoo Yang, Alex Paterson, Theodoros Panagopoulos, John Holland, Dog Buchberger, Brad Mays, Mike Chafin, Troy Detrick "Using RF measurements and simple, empirical plasma models to enhance the performance of dielectric etch systems" Proceedings of the 2003 Gaseous Electronics Conference; San Francisco, CA; October 2003.
    5. Emily Allen and Susan Ambrose, "An Electronic Trip Through Semiconductors," in Caroline Baillie and Linda Vanasupa, Eds., Navigating the Materials World Academic Press (2003).
    6. Emily Allen, Huong Vu* and David Parent, "Exploring Solar Cell Technology," Procs. ASEE Annual Conference (2003).
    7. N. Mourtos and E. Allen, "Assessing the Effectiveness of a Faculty Instructional Development Program, Part 2: Teaching and Learning Styles," Procs. 6th UICEE Annual Conference on Engineering Education, Queensland, Australia (2003).
    8. D. S. Wander*, F. Yang*, Melanie McNeil (ChE) and Brooke Lustig (ChE) "Scoring DNA sequence alignment using energetics of hybridization" (2003) Proceedings of Annual Meeting of American Institute of Chemical Engineers T2/555b.
    9. Fariabi, S., M. Rooein and G. Selvaduray (MatE), "Structure-Property-Processing Relationships of 316L Stainless Steel Hypotubing for Manufacturing of Intravascular Stents", Proceedings ASM Materials and Processes for Medical Devices Conference, ASM International, Anaheim, California, September 8-10, 2003.
    10. Selvaduray, G. (MatE), and H. Bueno*, "The Critical Surface Tension of 316L Stainless Steel: Implications for Stent Thrombogenicity", Proceedings ASM Materials and Processes for Medical Devices Conference, ASM International, Anaheim, California, September 8-10, 2003.
    11. Selvaduray, G., and H. Bueno, "The Critical Surface Tension of 316L Stainless Steel: Implications for Stent Thrombogenicity", Proceedings ASM Materials and Processes for Medical Devices Conference, ASM International, Anaheim, California, September 8-10, 2003.
    12.  Fariabi, S., M. Rooein and G. Selvaduray, "Structure-Property-Processing Relationships of 316L Stainless Steel Hypotubing for Manufacturing of Intravascular Stents", Proceedings Materials and Processes for Medical Devices Conference, ASM International, Anaheim, California, September 8-10, 2003.
    13. Nguyen, H.T. Ng, J. Kong, A.M. Cassell, R. Quinn, J. Li, J. Han, M. McNeil, and M. Meyyappan, Epitaxial Directional Growth of Indium-Doped Tin Oxide Nanowire Arrays, Nano Lett. 2003, 3(7), 925-928.
    14. Wander, D. S., Yang, F., McNeil, M and Lustig, B. 鈥淪coring DNA sequence alignment using energetics of hybridization鈥� Proceedings of Annual Meeting of American Institute of Chemical Engineers, San Francisco, 2003.
• 2002 Publications

  • by BCME Faculty and Students

    (* indicates student author)

    1. R. L. Comstock, "Review of Modern magnetic materials in data storage," J. Mat. Sci. : Materials in Electronics 13 (2002) 509-523.
    2. Gregory Young, Stacy Gleixner, David Parent, Yasser Dessouky, Emily Allen, and Linda Vanasupa, "Assessment of the Microelectronics Process Engineering Program at 91果冻制片厂," Procs. 2002 ASEE/SEFI/TUB International Colloquium on Global Changes in Engineering Education, Berlin, (2002).
    3. S.H. Gleixner, G.L. Young, L.S. Vanasupa, Y. Dessouky, D.W. Parent and E.L. Allen, "Teaching Design of Experiments and Statistical Analysis of Data Through Laboratory Experiments," Procs. 2002 Frontiers in Education Conference (2002).
    4. Emily Allen, Stacy Gleixner, David Parent, Greg Young, Yasser Dessouky and Linda Vanasupa, "Microelectronics Process Engineering at San Jose State University: A Manufacturing-Oriented Interdisciplinary Degree Program," International Journal of Engineering Education 18 (5), (2002).
    5. Melanie McNeil, Art Diaz, Michael Jennings, and Claire Komives, "Environmental Health And Safety And Biochemical Engineering With A Chemical Engineering Foundation," accepted for publication in the Proceedings of the ASEE Annual Conference (2002).
    6. Selvaduray, G., K. McMullin, S. Arnold and R. Brindos*, "Nonstructural Hazard Mitigation Retrofit of an Engineering Laboratory at San Jose State University," Submitted for presentation at the Seventh National Conference on Earthquake Engineering, Boston, Massachusetts, July 2002.
    7. Dewi Nilasari**, Nir Dover, Sabine Rech, Claire Komives (CK correspondence author);Expression of Recombinant Green Fluorescent Protein in Bacillus Methanolicus; Biotechnology Progress, 28(3), 2012,662-668.
    8. Eric A. Appel, Victor Y. Lee, Timothy T. Nguyen, Melanie McNeil, Frederik Nederberg, James L. Hedrick, William C. Swope, Julia E. Rice, Robert D. Miller, Jos茅ph Slu, 鈥淭oward Biodegradable Nanogel Star Polymers via Organocatalytic ROP鈥�, Chem. Commun., 48 (49), 6163 鈥� 6165, (2012).
    9. Srinivasan, A., J.L. Lopez-Ribot, A.K. Ramasubramanian (2012), 鈥淐andida albicans Biofilm Chip (CaBChip) for high-throughput antifungal drug screening鈥�, Journal of Visual Experimentation, 65: e3845. PMID: 22847237.
• 2001 Publications

  • by BCME Faculty and Students

    (* indicates student author)

    1. Selvaduray, G., W. Lee and S. Yee, "Fluxless Soldering: A Review," Microelectronic Packaging, 2001, Vol. 1, pp 289-304.
    2. S.H. Gleixner, "Ways That Engineers Can Get Involved In Recruiting Future Materials Scientists and Engineers", Materials Research Society Symposium Proceedings: Impacting Society through Materials Science and Engineering Education (2001).
    3. David Parent, Yasser Dessouky, Stacy Gleixner, Gregory Young and Emily Allen, "The Microelectronics Process Engineering Program at 91果冻制片厂," Proceedings of the 14th Biennial IEEE University/Government/Industry Microelectronics Symposium," Richmond, VA (June 2001).
    4. Emily Allen, Stacy Gleixner, David Parent, Greg Young, Yasser Dessouky and Linda Vanasupa, "Microelectronics Process Engineering: a non-traditional approach to MS&E," Materials Research Society Procs. 684E, GG5.1 (April 2001).
    5. Linda Vanasupa, Heather Smith, Stacy Gleixner, Greg Young and Emily Allen, "Dealing with Variation in Measurements and Processes: Experiments for an Undergraduate Laboratory," Materials Research Society Procs. 684E, GG5.8 (April 2001).
    6. Nikos Mourtos and Emily Allen, "Introducing Cooperative Learning through a Faculty Instructional Development Program," J. Eng. Ed. 90, 669 (2001).
    7. A. F. Diaz and D. L. Drogos, Eds., Oxygenates in Gasoline: Environmental Aspect, American Chemical Society, Oxford Press, 2001.
    8. W.Y.Lee, M. Carey, M.F. Toney, P. Rice, B. Gurney, H.-C. Chang*, E. Allen and D. Mauri, "Oxygen-enhanced IrMn spin valves deposited by ion-beam and magnetron sputtering," J. Appl. Phys. 89, 6925 (2001).
    9. Selvaduray, G., W. Lee and S. Yee, "Fluxless Soldering: A Review," Microelectronic Packaging, 2001, Vol. 1, pp 289-304.